Lawn mowers are excellent tools to keep your yard tidy. But when it comes to cleaning them, things can get a bit tricky.
Slight mistakes can damage the blades and hamper their performances. To put an end to your struggle, we are here to discuss how to use deck wash on lawn mowers.
Throughout the article, we will try to cover up the aspects you need. So, follow till the end and learn how to ace the skill of using deck wash on your lawn mower.
Why You Should Clean Your Lawn Mower
Cleaning your lawnmower frequently is extremely important to enjoy a hassle-free experience. When you clip grass with a dirty lawn mower, several problems can arise. For example, the clippings or the chopped bits of grass might get stuck with the mower’s blades.
Now, this is a common scenario, and it can happen anytime. Even so, cleaning under the lawnmower deck regularly can minimize the possibility of such situations.
After that, you have the risk of rusting. The damp condition and the consistent flow of water increase the risk even more. However, cleaning it will help you keep your lawnmower safe from rust.
Finally, cleaning your lawn mower deck will make sure that you don’t face interrupted airflow. That is why you should clean your lawn mower frequently.
Why Choose Deck Wash?
There can be many ways to clean up your lawnmower. But among all those options, you should go for deck wash. Now, you might think why should you pick deck wash anyways?
Well, there are several reasons behind it. For instance, the deck wash allows you to clean your mower without bending over.
That is right. You don’t need to kneel or bend to reach those difficult spots anymore. Not just that, the water flow makes sure to take down all the clippings and debris at the same time.
This way, you can take care of your lawn mower and elongate its lifespan. And for this reason, deck wash is the best option that you can use.
How To Use Deck Wash On Lawn Mower
In this section, we will be presenting you with the techniques of using a deck wash on lawn mowers. So, please pay close attention to the following steps.
For the initial preparation, you need to observe your garden or lawn and make some assessments. The goal is to find a flat and suitable spot for the cleaning process. Again, gathering necessary stuff like hoses and screws is also a part of this step.
The next step after initializing is attaching the hoses. Take a hose and adjust it to one end. Look for the wide area to park it and put the other end of the hose there. After adjusting, make sure to check all the ports thoroughly.
Turning Off Engine
Take your lawn mower to the wide area that you have just chosen. Adjust the shift levers to access the parking brake. This will help you to prevent the rolling issues and keep everything stable. Now, turn off your engine and prepare for the upcoming steps.
Run the Water
Once you are done with assembling the hoses, it is time to turn on the water flow. You will find a quick coupler on the top of your lawn mower. This quick coupler will help you to drive your mounting pins and attach the hose without any additional tools. So, use it and let the water flow through the hose.
For this step, you need superior control over your lawn mower. And so, hop on the mower’s seat and turn the engine on. When the blades spin, they get in contact with the water.
Keep it going for a couple of minutes and you will see that the number of clippings is gradually reducing. This process will clean the blades of your lawnmower without any issues.
Stop Engine And Water Flow
Now that you are done cleaning your blades, it is time to stop the water flow once again. To do that, follow the same steps and detach the hose. Finally, turn off the engine to set everything back in place.
Repeat And Reassemble
Every mower doesn’t work the same way. As such, keep an eye on the discharge port and repeat the step until everything is clean. Finally, you can reassemble the entire thing and leave it for the next use.
Keep It Dry
Drying down your lawn mower is a crucial step here. If you neglect this aspect, you can do serious harm to your mower’s blades. So, no matter what you do, make sure to dry it down completely prior to next use.
There you have it! Simple and effective guidelines on how to use deck wash on lawn mowers. Now, figuring it out for the first time might be difficult for you.
So, try to stick with the correct sequence and go through the steps thoroughly. This way, you can prevent all sorts of damages and enjoy a smooth application every time.